I have to change the flasher unit attached to the hazard indicator on my TT.
Anyone have an idea how to get to it.
It seems the whol dash has to come out.
Any advise would be greatly appreciated!!
Thx

 

You get at it by removing the radio and accessing the hazzard switch from below using that opening. Mine is on the way out to, as this unit controls the turn signals, and mine are starting to stop blinking every once in a while while waiting to turn. If you do a search on other Audi sites you can find a DIY. My car has to go in for a service soon, and since it's a CPO car, I'm planning on getting my unit changed under warranty. Apparantly it's a fairly common problem on our TT's.

 

Thx for the quick reply, ur awesome.
Is there some special tools for getting the radio out?

 

You need the radio keys to remove the radio. Here is a link to the do it yourself, good luck, after reading it I'll be getting the dealer to do it!

If you go to this Jeff guy's main page he has many other helpful DIY pages.

Jeff's 2001 Audi TT quattro Roadster

 

Thanks Allan_G_03_TT, that info was most helpful!!!
You're a legend!
Trust and hope you have a great run with your TT.
Magnum.

 

Not sure why I'm a legend Magnum! I'm just a fellow TT enthusiast like all of us on here. Hope that repair works out for you, let us know.

 

I'm on a few forums and not everyone is as helpful as you are!
Just appreciative.... thx

 

We just changed the flasher and the turn signal arm on an 01 TT 225HP due to the dreaded "random fast clicks" after completing a turn.

The flasher was easier than the arm!

 

I had Owasco Audi change out my flasher unit yesterday while it was in for the Haldex service. It's nice to have turn signals again!, they were working only about 30% of the time.

 

Magnum,
Did you get your indicators fixed?

Last year I had them go twice. The second time was different from the first, but the dealership told me it would be the hazard switch again.
I explained that the problem was different from when I'd had to have the hazard switch replaced; and my research from the UK TT Forum suggested the turn signal stalk.
Dealership insisted it wasn't.
Fortunately I'd kept my old (failed) hazard and reinstalled to see if the problem was the same; but it changed; therefore I knew it had to be the stalk.
I purchased and installed new stalk myself and problem was fixed.
I understand that it most cases it's the hazard switch; but a failed indicator stalk also gives similar failure (but not exactly same symptoms).