In the rear end exhaust system....LOL bored @ work

It is beneath the steering wheel colum on the bottom right hand side from the front hood latch. Bend down to the floor and look up towards the left hand side of the plastic moulding it should be pruple or white usually

 

coolness...thank you very much

 

So I heard there is a trick with VAG COM so that the windows come down from the remote. Who ever knows how to set this up or knows the setting that would have to be changed please let me know thanks

or email me @ c.jpereira@hotmail.com

Chris.

Mint 1.8T

 

Someone must know how to do this?

 

I know how , you're going to need an interface cable and a lap top computer.
I did alot of searching on Audizine and other forums to figure out how to do. You'll have to do the same. This is just to get you started. Hope this helps.


Here are the codes.
Vag-Com Codes

Euro Headlights & DRL
Module 09 (Central Electrical), recode to ###XY, where:

X = DRL
0 – Halogen without DRL
1 – Halogen with DRL
2 – Bi-Xenon with DRL
3 – Bi-Xenon without DRL
4 – Bi-Xenon with DRL / tail light / license plate light

Y = Locale
1 – Rest of World / Nordic Countries / Denmark / Croatia / Baltic Countries with Bi-Xenon
2 – Nordic Countries / Denmark / Croatia / Baltic Countries without Bi-Xenon
3 – USA / Canada with Bi-Xenon
4 – Canada without Bi-Xenon
5 – Special Vehicles

*Bonus 1* Enable Dashboard Headlight Indicator
Module 17 (Instruments), recode to ??###, where ?? = [existing 2 digit value - 2]

NOTE - This mod tested on bi-xenon cars only; halogen cars may not work as intended.


Disable Seatbelt Chime
Module 17 (Instruments), recode to ###Z1, where:

Z = Warning Type
0 – Disabled
1 – Europe NCAP – Visual indicator always on, audio chime for 91 seconds active
2 – USA & Canada NAR Old – Visual indicator & audio chime for 6 seconds at startup
3 – USA & Canada NAR New – Visual indicator on, audio chime every 30 seconds
4 – Europe NCAP including front passenger seat
5 – USA & Canada NAR Old including front passenger seat
6 – USA & Canada NAR New including front passenger seat (North American B7 default)
NOTE - All Module 17 recodes can be combined and done together. e.g. To do both above, recode to ??#Z1


**Bonus 2** Trip Computer Fuel Consumption Correction Factor
Module 17 (Instruments), Adaptation channel 03
- Affects: Instantaneous Fuel Consumption, Average Fuel Consumption, Range, & Distance to Empty
- Default: 100%
- Range of values: 85 – 115%


Remote Window Functions
Module 46 (Central Convienence), recode to [existing value + 64]


1-Click Unlock All Doors
Module 46 (Central Convienence), recode to [existing value - 4]

***Bonus 3*** Disable Auto-Lock
Module 46 (Central Convienence), recode to [existing value - 32]

NOTE - All Module 46 recodes can be combined and done together. e.g. To do all 3 above, recode to [existing value + 64 - 4 + 32]

 

okie well I have this..... I have the full vag come program... just dont know how to setup the settng well....?

 

Gotcha... here ya go. I thought you already had it up and running.

Here's a link The $20 eBay VAG-COM Cable Walkthrough *Revisited* - Audizine

 

are you sure i can change this setting on my 04 audi A4 i cant figure this out...?

 

I honestly don't know. My car is an 08 A4 so there may be differences that I don't know about. This is my first Audi and VAG-COM is all new to me. My suggestion to you is to search Audizine.com, it seems to be the premier Audi forum site from what I can see.

 

This site has all the tweaks for you B6.

Ross-Tech: VAG-COM: Audi B6 VAG-COM Info