Control Arms - 1999-A6; 2.8
#1
Guest
Posts: n/a
Control Arms - 1999-A6; 2.8
I'm having problems with my control arms on my car. Are there 2 control
arms on each side (upper/lower ??). Anyway my left side "clanks" pretty
badly. I have 86,000 on my unit; How should I proceed to fix this situation?
Fix just two left components or fix all four left and right?
Any advice helpful..
arms on each side (upper/lower ??). Anyway my left side "clanks" pretty
badly. I have 86,000 on my unit; How should I proceed to fix this situation?
Fix just two left components or fix all four left and right?
Any advice helpful..
#2
Guest
Posts: n/a
Re: Control Arms - 1999-A6; 2.8
"JMay" <jmay@***.net> wrote in message
news:Vf%Ob.4272$_H5.1856@lakeread06...
> I'm having problems with my control arms on my car. Are there 2 control
> arms on each side (upper/lower ??). Anyway my left side "clanks" pretty
> badly. I have 86,000 on my unit; How should I proceed to fix this
situation?
> Fix just two left components or fix all four left and right?
> Any advice helpful..
>
>
You might as well change them all, there is a decently priced set at one of
the online German car suppliers, it'll probably be cheaper than two
individual control arms. And besides, with eight (yes eight) control arms in
the front, there's alot to go wrong, it's a common problem. (not too sure
about the A6's, but sure about the A4's).
Romy
#3
Guest
Posts: n/a
Re: Control Arms - 1999-A6; 2.8
I changed one side, and only the upper ones (2 arms) and it is fine
"JMay" <jmay@***.net> wrote in message
news:Vf%Ob.4272$_H5.1856@lakeread06...
> I'm having problems with my control arms on my car. Are there 2 control
> arms on each side (upper/lower ??). Anyway my left side "clanks" pretty
> badly. I have 86,000 on my unit; How should I proceed to fix this
situation?
> Fix just two left components or fix all four left and right?
> Any advice helpful..
>
>
"JMay" <jmay@***.net> wrote in message
news:Vf%Ob.4272$_H5.1856@lakeread06...
> I'm having problems with my control arms on my car. Are there 2 control
> arms on each side (upper/lower ??). Anyway my left side "clanks" pretty
> badly. I have 86,000 on my unit; How should I proceed to fix this
situation?
> Fix just two left components or fix all four left and right?
> Any advice helpful..
>
>
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)