AUDI A4 AVANT 2.4 SE 6 CYL
#1
Guest
Posts: n/a
AUDI A4 AVANT 2.4 SE 6 CYL
I WANT TO CHANGE THE CAMBELT ON MY CAR WHICH IS COMING UP FOR ITS SECOND
ONE AT 155,000 MILES. I AM AN EXPERIENCED MECHANIC/PROFESSIONAL ENGINEER SO
CAN "DO THE JOB" BUT WOULD LIKE TO KNOW WHAT TO I HAVE TO DO BEFORE I START.
WHERE CAN I FIND THE NECESSARY INFORMATION - THE HAYNES MANUAL ONLY DEALS
WITH 4 CYL MODELS AND MY LOCAL AUDI DEALER IS UNDERSTANDABLY NOT VERY
HELPFUL !!!
CAN I GET HOLD OF THE INFORMATION ON THE NET ANYWHERE OR BUY A CD OF THE
WORKSHOP MANUAL PLEASE ???
ALAN MATTHEWS
ONE AT 155,000 MILES. I AM AN EXPERIENCED MECHANIC/PROFESSIONAL ENGINEER SO
CAN "DO THE JOB" BUT WOULD LIKE TO KNOW WHAT TO I HAVE TO DO BEFORE I START.
WHERE CAN I FIND THE NECESSARY INFORMATION - THE HAYNES MANUAL ONLY DEALS
WITH 4 CYL MODELS AND MY LOCAL AUDI DEALER IS UNDERSTANDABLY NOT VERY
HELPFUL !!!
CAN I GET HOLD OF THE INFORMATION ON THE NET ANYWHERE OR BUY A CD OF THE
WORKSHOP MANUAL PLEASE ???
ALAN MATTHEWS
#2
Guest
Posts: n/a
Re: AUDI A4 AVANT 2.4 SE 6 CYL
"ALAN MATTHEWS via CarKB.com" <forum@nospam.CarKB.com> wrote in message
news:9b30e6d8b60247d18b6d4355b36a8f36@CarKB.com...
>I WANT TO CHANGE THE CAMBELT ON MY CAR WHICH IS COMING UP FOR ITS SECOND
> ONE AT 155,000 MILES. I AM AN EXPERIENCED MECHANIC/PROFESSIONAL ENGINEER
> SO
> CAN "DO THE JOB" BUT WOULD LIKE TO KNOW WHAT TO I HAVE TO DO BEFORE I
> START.
>
> WHERE CAN I FIND THE NECESSARY INFORMATION - THE HAYNES MANUAL ONLY DEALS
> WITH 4 CYL MODELS AND MY LOCAL AUDI DEALER IS UNDERSTANDABLY NOT VERY
> HELPFUL !!!
>
> CAN I GET HOLD OF THE INFORMATION ON THE NET ANYWHERE OR BUY A CD OF THE
> WORKSHOP MANUAL PLEASE ???
>
> ALAN MATTHEWS
http://www.tomorrowstechnician.com/tt/tt50448.htm
#3
Guest
Posts: n/a
Re: AUDI A4 AVANT 2.4 SE 6 CYL
"ALAN MATTHEWS via CarKB.com" <forum@nospam.CarKB.com> wrote in message
news:9b30e6d8b60247d18b6d4355b36a8f36@CarKB.com...
>I WANT TO CHANGE THE CAMBELT ON MY CAR WHICH IS COMING UP FOR ITS SECOND
> ONE AT 155,000 MILES. I AM AN EXPERIENCED MECHANIC/PROFESSIONAL ENGINEER
> SO
> CAN "DO THE JOB" BUT WOULD LIKE TO KNOW WHAT TO I HAVE TO DO BEFORE I
> START.
>
> WHERE CAN I FIND THE NECESSARY INFORMATION - THE HAYNES MANUAL ONLY DEALS
> WITH 4 CYL MODELS AND MY LOCAL AUDI DEALER IS UNDERSTANDABLY NOT VERY
> HELPFUL !!!
>
> CAN I GET HOLD OF THE INFORMATION ON THE NET ANYWHERE OR BUY A CD OF THE
> WORKSHOP MANUAL PLEASE ???
>
> ALAN MATTHEWS
http://www.tomorrowstechnician.com/tt/tt50448.htm
#4
Guest
Posts: n/a
Re: AUDI A4 AVANT 2.4 SE 6 CYL
"ALAN MATTHEWS via CarKB.com" <forum@nospam.CarKB.com> wrote in message
news:9b30e6d8b60247d18b6d4355b36a8f36@CarKB.com...
>I WANT TO CHANGE THE CAMBELT ON MY CAR WHICH IS COMING UP FOR ITS SECOND
> ONE AT 155,000 MILES. I AM AN EXPERIENCED MECHANIC/PROFESSIONAL ENGINEER
> SO
> CAN "DO THE JOB" BUT WOULD LIKE TO KNOW WHAT TO I HAVE TO DO BEFORE I
> START.
>
> WHERE CAN I FIND THE NECESSARY INFORMATION - THE HAYNES MANUAL ONLY DEALS
> WITH 4 CYL MODELS AND MY LOCAL AUDI DEALER IS UNDERSTANDABLY NOT VERY
> HELPFUL !!!
>
> CAN I GET HOLD OF THE INFORMATION ON THE NET ANYWHERE OR BUY A CD OF THE
> WORKSHOP MANUAL PLEASE ???
>
> ALAN MATTHEWS
http://www.tomorrowstechnician.com/tt/tt50448.htm
#5
Guest
Posts: n/a
Re: AUDI A4 AVANT 2.4 SE 6 CYL
ALAN MATTHEWS via CarKB.com wrote:
> I WANT TO CHANGE THE CAMBELT ON MY CAR WHICH IS COMING UP FOR ITS
SECOND
> ONE AT 155,000 MILES. I AM AN EXPERIENCED MECHANIC/PROFESSIONAL
ENGINEER SO
> CAN "DO THE JOB" BUT WOULD LIKE TO KNOW WHAT TO I HAVE TO DO BEFORE I
START.
>
> WHERE CAN I FIND THE NECESSARY INFORMATION - THE HAYNES MANUAL ONLY
DEALS
> WITH 4 CYL MODELS AND MY LOCAL AUDI DEALER IS UNDERSTANDABLY NOT VERY
> HELPFUL !!!
>
> CAN I GET HOLD OF THE INFORMATION ON THE NET ANYWHERE OR BUY A CD OF
THE
> WORKSHOP MANUAL PLEASE ???
Here's a place to start:
http://ask-leo.com/why_is_everyone_o...so_grumpy.html
HAND,
E.P.
#6
Guest
Posts: n/a
Re: AUDI A4 AVANT 2.4 SE 6 CYL
ALAN MATTHEWS via CarKB.com wrote:
> I WANT TO CHANGE THE CAMBELT ON MY CAR WHICH IS COMING UP FOR ITS
SECOND
> ONE AT 155,000 MILES. I AM AN EXPERIENCED MECHANIC/PROFESSIONAL
ENGINEER SO
> CAN "DO THE JOB" BUT WOULD LIKE TO KNOW WHAT TO I HAVE TO DO BEFORE I
START.
>
> WHERE CAN I FIND THE NECESSARY INFORMATION - THE HAYNES MANUAL ONLY
DEALS
> WITH 4 CYL MODELS AND MY LOCAL AUDI DEALER IS UNDERSTANDABLY NOT VERY
> HELPFUL !!!
>
> CAN I GET HOLD OF THE INFORMATION ON THE NET ANYWHERE OR BUY A CD OF
THE
> WORKSHOP MANUAL PLEASE ???
Here's a place to start:
http://ask-leo.com/why_is_everyone_o...so_grumpy.html
HAND,
E.P.
#7
Guest
Posts: n/a
Re: AUDI A4 AVANT 2.4 SE 6 CYL
ALAN MATTHEWS via CarKB.com wrote:
> I WANT TO CHANGE THE CAMBELT ON MY CAR WHICH IS COMING UP FOR ITS
SECOND
> ONE AT 155,000 MILES. I AM AN EXPERIENCED MECHANIC/PROFESSIONAL
ENGINEER SO
> CAN "DO THE JOB" BUT WOULD LIKE TO KNOW WHAT TO I HAVE TO DO BEFORE I
START.
>
> WHERE CAN I FIND THE NECESSARY INFORMATION - THE HAYNES MANUAL ONLY
DEALS
> WITH 4 CYL MODELS AND MY LOCAL AUDI DEALER IS UNDERSTANDABLY NOT VERY
> HELPFUL !!!
>
> CAN I GET HOLD OF THE INFORMATION ON THE NET ANYWHERE OR BUY A CD OF
THE
> WORKSHOP MANUAL PLEASE ???
Here's a place to start:
http://ask-leo.com/why_is_everyone_o...so_grumpy.html
HAND,
E.P.
#8
Guest
Posts: n/a
Re: AUDI A4 AVANT 2.4 SE 6 CYL
You need a Bentley manual. Paper one is easier to use.
About 5 hours work VW/Audi recommends some special tools but they are not
necessary if you mark all the pulleys.
Make sure you replace the water pump as this is weak point on the V6. The
timing belt also turns the water pump.
"ALAN MATTHEWS via CarKB.com" <forum@nospam.CarKB.com> wrote in message
news:9b30e6d8b60247d18b6d4355b36a8f36@CarKB.com...
>I WANT TO CHANGE THE CAMBELT ON MY CAR WHICH IS COMING UP FOR ITS SECOND
> ONE AT 155,000 MILES. I AM AN EXPERIENCED MECHANIC/PROFESSIONAL ENGINEER
> SO
> CAN "DO THE JOB" BUT WOULD LIKE TO KNOW WHAT TO I HAVE TO DO BEFORE I
> START.
>
> WHERE CAN I FIND THE NECESSARY INFORMATION - THE HAYNES MANUAL ONLY DEALS
> WITH 4 CYL MODELS AND MY LOCAL AUDI DEALER IS UNDERSTANDABLY NOT VERY
> HELPFUL !!!
>
> CAN I GET HOLD OF THE INFORMATION ON THE NET ANYWHERE OR BUY A CD OF THE
> WORKSHOP MANUAL PLEASE ???
>
> ALAN MATTHEWS
About 5 hours work VW/Audi recommends some special tools but they are not
necessary if you mark all the pulleys.
Make sure you replace the water pump as this is weak point on the V6. The
timing belt also turns the water pump.
"ALAN MATTHEWS via CarKB.com" <forum@nospam.CarKB.com> wrote in message
news:9b30e6d8b60247d18b6d4355b36a8f36@CarKB.com...
>I WANT TO CHANGE THE CAMBELT ON MY CAR WHICH IS COMING UP FOR ITS SECOND
> ONE AT 155,000 MILES. I AM AN EXPERIENCED MECHANIC/PROFESSIONAL ENGINEER
> SO
> CAN "DO THE JOB" BUT WOULD LIKE TO KNOW WHAT TO I HAVE TO DO BEFORE I
> START.
>
> WHERE CAN I FIND THE NECESSARY INFORMATION - THE HAYNES MANUAL ONLY DEALS
> WITH 4 CYL MODELS AND MY LOCAL AUDI DEALER IS UNDERSTANDABLY NOT VERY
> HELPFUL !!!
>
> CAN I GET HOLD OF THE INFORMATION ON THE NET ANYWHERE OR BUY A CD OF THE
> WORKSHOP MANUAL PLEASE ???
>
> ALAN MATTHEWS
#9
Guest
Posts: n/a
Re: AUDI A4 AVANT 2.4 SE 6 CYL
You need a Bentley manual. Paper one is easier to use.
About 5 hours work VW/Audi recommends some special tools but they are not
necessary if you mark all the pulleys.
Make sure you replace the water pump as this is weak point on the V6. The
timing belt also turns the water pump.
"ALAN MATTHEWS via CarKB.com" <forum@nospam.CarKB.com> wrote in message
news:9b30e6d8b60247d18b6d4355b36a8f36@CarKB.com...
>I WANT TO CHANGE THE CAMBELT ON MY CAR WHICH IS COMING UP FOR ITS SECOND
> ONE AT 155,000 MILES. I AM AN EXPERIENCED MECHANIC/PROFESSIONAL ENGINEER
> SO
> CAN "DO THE JOB" BUT WOULD LIKE TO KNOW WHAT TO I HAVE TO DO BEFORE I
> START.
>
> WHERE CAN I FIND THE NECESSARY INFORMATION - THE HAYNES MANUAL ONLY DEALS
> WITH 4 CYL MODELS AND MY LOCAL AUDI DEALER IS UNDERSTANDABLY NOT VERY
> HELPFUL !!!
>
> CAN I GET HOLD OF THE INFORMATION ON THE NET ANYWHERE OR BUY A CD OF THE
> WORKSHOP MANUAL PLEASE ???
>
> ALAN MATTHEWS
About 5 hours work VW/Audi recommends some special tools but they are not
necessary if you mark all the pulleys.
Make sure you replace the water pump as this is weak point on the V6. The
timing belt also turns the water pump.
"ALAN MATTHEWS via CarKB.com" <forum@nospam.CarKB.com> wrote in message
news:9b30e6d8b60247d18b6d4355b36a8f36@CarKB.com...
>I WANT TO CHANGE THE CAMBELT ON MY CAR WHICH IS COMING UP FOR ITS SECOND
> ONE AT 155,000 MILES. I AM AN EXPERIENCED MECHANIC/PROFESSIONAL ENGINEER
> SO
> CAN "DO THE JOB" BUT WOULD LIKE TO KNOW WHAT TO I HAVE TO DO BEFORE I
> START.
>
> WHERE CAN I FIND THE NECESSARY INFORMATION - THE HAYNES MANUAL ONLY DEALS
> WITH 4 CYL MODELS AND MY LOCAL AUDI DEALER IS UNDERSTANDABLY NOT VERY
> HELPFUL !!!
>
> CAN I GET HOLD OF THE INFORMATION ON THE NET ANYWHERE OR BUY A CD OF THE
> WORKSHOP MANUAL PLEASE ???
>
> ALAN MATTHEWS
#10
Guest
Posts: n/a
Re: AUDI A4 AVANT 2.4 SE 6 CYL
You need a Bentley manual. Paper one is easier to use.
About 5 hours work VW/Audi recommends some special tools but they are not
necessary if you mark all the pulleys.
Make sure you replace the water pump as this is weak point on the V6. The
timing belt also turns the water pump.
"ALAN MATTHEWS via CarKB.com" <forum@nospam.CarKB.com> wrote in message
news:9b30e6d8b60247d18b6d4355b36a8f36@CarKB.com...
>I WANT TO CHANGE THE CAMBELT ON MY CAR WHICH IS COMING UP FOR ITS SECOND
> ONE AT 155,000 MILES. I AM AN EXPERIENCED MECHANIC/PROFESSIONAL ENGINEER
> SO
> CAN "DO THE JOB" BUT WOULD LIKE TO KNOW WHAT TO I HAVE TO DO BEFORE I
> START.
>
> WHERE CAN I FIND THE NECESSARY INFORMATION - THE HAYNES MANUAL ONLY DEALS
> WITH 4 CYL MODELS AND MY LOCAL AUDI DEALER IS UNDERSTANDABLY NOT VERY
> HELPFUL !!!
>
> CAN I GET HOLD OF THE INFORMATION ON THE NET ANYWHERE OR BUY A CD OF THE
> WORKSHOP MANUAL PLEASE ???
>
> ALAN MATTHEWS
About 5 hours work VW/Audi recommends some special tools but they are not
necessary if you mark all the pulleys.
Make sure you replace the water pump as this is weak point on the V6. The
timing belt also turns the water pump.
"ALAN MATTHEWS via CarKB.com" <forum@nospam.CarKB.com> wrote in message
news:9b30e6d8b60247d18b6d4355b36a8f36@CarKB.com...
>I WANT TO CHANGE THE CAMBELT ON MY CAR WHICH IS COMING UP FOR ITS SECOND
> ONE AT 155,000 MILES. I AM AN EXPERIENCED MECHANIC/PROFESSIONAL ENGINEER
> SO
> CAN "DO THE JOB" BUT WOULD LIKE TO KNOW WHAT TO I HAVE TO DO BEFORE I
> START.
>
> WHERE CAN I FIND THE NECESSARY INFORMATION - THE HAYNES MANUAL ONLY DEALS
> WITH 4 CYL MODELS AND MY LOCAL AUDI DEALER IS UNDERSTANDABLY NOT VERY
> HELPFUL !!!
>
> CAN I GET HOLD OF THE INFORMATION ON THE NET ANYWHERE OR BUY A CD OF THE
> WORKSHOP MANUAL PLEASE ???
>
> ALAN MATTHEWS