Audi 1.8 cylinder head bolt question
08-22-2007 | 06:18 PM
#1
Guest
Posts: n/a
Audi 1.8 cylinder head bolt question
I have a 2001 Audi A4 1.8 turbo engine. I am trying to get the cylinder
head off. Can anyone tell me what size tool I need to fit the head
bolts? I think they are maybe T-50 torx, but not sure. The tool has to
be long to fit down inside the bores. If anyone knows what tool to use,
and where I can get one, I would be most grateful.
head off. Can anyone tell me what size tool I need to fit the head
bolts? I think they are maybe T-50 torx, but not sure. The tool has to
be long to fit down inside the bores. If anyone knows what tool to use,
and where I can get one, I would be most grateful.
08-23-2007 | 05:44 AM
#2
Guest
Posts: n/a
Re: Audi 1.8 cylinder head bolt question
On Wed, 22 Aug 2007 22:18:30 GMT, <T_Diver@hotmail.com> wrote:
>I have a 2001 Audi A4 1.8 turbo engine. I am trying to get the cylinder
>head off. Can anyone tell me what size tool I need to fit the head
>bolts? I think they are maybe T-50 torx, but not sure. The tool has to
>be long to fit down inside the bores. If anyone knows what tool to use,
>and where I can get one, I would be most grateful.
It appears similar to a torx head but it's actually a polydrive.
http://buy1.snapon.com/catalog/item....re&dir=catalog
>I have a 2001 Audi A4 1.8 turbo engine. I am trying to get the cylinder
>head off. Can anyone tell me what size tool I need to fit the head
>bolts? I think they are maybe T-50 torx, but not sure. The tool has to
>be long to fit down inside the bores. If anyone knows what tool to use,
>and where I can get one, I would be most grateful.
It appears similar to a torx head but it's actually a polydrive.
http://buy1.snapon.com/catalog/item....re&dir=catalog
08-23-2007 | 05:44 AM
#3
Guest
Posts: n/a
Re: Audi 1.8 cylinder head bolt question
On Wed, 22 Aug 2007 22:18:30 GMT, <T_Diver@hotmail.com> wrote:
>I have a 2001 Audi A4 1.8 turbo engine. I am trying to get the cylinder
>head off. Can anyone tell me what size tool I need to fit the head
>bolts? I think they are maybe T-50 torx, but not sure. The tool has to
>be long to fit down inside the bores. If anyone knows what tool to use,
>and where I can get one, I would be most grateful.
It appears similar to a torx head but it's actually a polydrive.
http://buy1.snapon.com/catalog/item....re&dir=catalog
>I have a 2001 Audi A4 1.8 turbo engine. I am trying to get the cylinder
>head off. Can anyone tell me what size tool I need to fit the head
>bolts? I think they are maybe T-50 torx, but not sure. The tool has to
>be long to fit down inside the bores. If anyone knows what tool to use,
>and where I can get one, I would be most grateful.
It appears similar to a torx head but it's actually a polydrive.
http://buy1.snapon.com/catalog/item....re&dir=catalog
08-23-2007 | 05:44 AM
#4
Guest
Posts: n/a
Re: Audi 1.8 cylinder head bolt question
On Wed, 22 Aug 2007 22:18:30 GMT, <T_Diver@hotmail.com> wrote:
>I have a 2001 Audi A4 1.8 turbo engine. I am trying to get the cylinder
>head off. Can anyone tell me what size tool I need to fit the head
>bolts? I think they are maybe T-50 torx, but not sure. The tool has to
>be long to fit down inside the bores. If anyone knows what tool to use,
>and where I can get one, I would be most grateful.
It appears similar to a torx head but it's actually a polydrive.
http://buy1.snapon.com/catalog/item....re&dir=catalog
>I have a 2001 Audi A4 1.8 turbo engine. I am trying to get the cylinder
>head off. Can anyone tell me what size tool I need to fit the head
>bolts? I think they are maybe T-50 torx, but not sure. The tool has to
>be long to fit down inside the bores. If anyone knows what tool to use,
>and where I can get one, I would be most grateful.
It appears similar to a torx head but it's actually a polydrive.
http://buy1.snapon.com/catalog/item....re&dir=catalog
08-23-2007 | 05:44 AM
#5
Guest
Posts: n/a
Re: Audi 1.8 cylinder head bolt question
On Wed, 22 Aug 2007 22:18:30 GMT, <T_Diver@hotmail.com> wrote:
>I have a 2001 Audi A4 1.8 turbo engine. I am trying to get the cylinder
>head off. Can anyone tell me what size tool I need to fit the head
>bolts? I think they are maybe T-50 torx, but not sure. The tool has to
>be long to fit down inside the bores. If anyone knows what tool to use,
>and where I can get one, I would be most grateful.
It appears similar to a torx head but it's actually a polydrive.
http://buy1.snapon.com/catalog/item....re&dir=catalog
>I have a 2001 Audi A4 1.8 turbo engine. I am trying to get the cylinder
>head off. Can anyone tell me what size tool I need to fit the head
>bolts? I think they are maybe T-50 torx, but not sure. The tool has to
>be long to fit down inside the bores. If anyone knows what tool to use,
>and where I can get one, I would be most grateful.
It appears similar to a torx head but it's actually a polydrive.
http://buy1.snapon.com/catalog/item....re&dir=catalog
08-23-2007 | 06:21 AM
#6
Guest
Posts: n/a
Re: Audi 1.8 cylinder head bolt question
In article <k5lqc3tt9sheb2hh1jh2fc60elocdoqeij@4ax.com>,
email@invalid.address says...
> On Wed, 22 Aug 2007 22:18:30 GMT, <T_Diver@hotmail.com> wrote:
>
> >I have a 2001 Audi A4 1.8 turbo engine. I am trying to get the cylinder
> >head off. Can anyone tell me what size tool I need to fit the head
> >bolts? I think they are maybe T-50 torx, but not sure. The tool has to
> >be long to fit down inside the bores. If anyone knows what tool to use,
> >and where I can get one, I would be most grateful.
>
> It appears similar to a torx head but it's actually a polydrive.
> http://buy1.snapon.com/catalog/item....re&dir=catalog
What's a polydrive? I clicked the link, but didn't have it. Where can
I get one?
>
email@invalid.address says...
> On Wed, 22 Aug 2007 22:18:30 GMT, <T_Diver@hotmail.com> wrote:
>
> >I have a 2001 Audi A4 1.8 turbo engine. I am trying to get the cylinder
> >head off. Can anyone tell me what size tool I need to fit the head
> >bolts? I think they are maybe T-50 torx, but not sure. The tool has to
> >be long to fit down inside the bores. If anyone knows what tool to use,
> >and where I can get one, I would be most grateful.
>
> It appears similar to a torx head but it's actually a polydrive.
> http://buy1.snapon.com/catalog/item....re&dir=catalog
What's a polydrive? I clicked the link, but didn't have it. Where can
I get one?
>
08-23-2007 | 06:21 AM
#7
Guest
Posts: n/a
Re: Audi 1.8 cylinder head bolt question
In article <k5lqc3tt9sheb2hh1jh2fc60elocdoqeij@4ax.com>,
email@invalid.address says...
> On Wed, 22 Aug 2007 22:18:30 GMT, <T_Diver@hotmail.com> wrote:
>
> >I have a 2001 Audi A4 1.8 turbo engine. I am trying to get the cylinder
> >head off. Can anyone tell me what size tool I need to fit the head
> >bolts? I think they are maybe T-50 torx, but not sure. The tool has to
> >be long to fit down inside the bores. If anyone knows what tool to use,
> >and where I can get one, I would be most grateful.
>
> It appears similar to a torx head but it's actually a polydrive.
> http://buy1.snapon.com/catalog/item....re&dir=catalog
What's a polydrive? I clicked the link, but didn't have it. Where can
I get one?
>
email@invalid.address says...
> On Wed, 22 Aug 2007 22:18:30 GMT, <T_Diver@hotmail.com> wrote:
>
> >I have a 2001 Audi A4 1.8 turbo engine. I am trying to get the cylinder
> >head off. Can anyone tell me what size tool I need to fit the head
> >bolts? I think they are maybe T-50 torx, but not sure. The tool has to
> >be long to fit down inside the bores. If anyone knows what tool to use,
> >and where I can get one, I would be most grateful.
>
> It appears similar to a torx head but it's actually a polydrive.
> http://buy1.snapon.com/catalog/item....re&dir=catalog
What's a polydrive? I clicked the link, but didn't have it. Where can
I get one?
>
08-23-2007 | 06:21 AM
#8
Guest
Posts: n/a
Re: Audi 1.8 cylinder head bolt question
In article <k5lqc3tt9sheb2hh1jh2fc60elocdoqeij@4ax.com>,
email@invalid.address says...
> On Wed, 22 Aug 2007 22:18:30 GMT, <T_Diver@hotmail.com> wrote:
>
> >I have a 2001 Audi A4 1.8 turbo engine. I am trying to get the cylinder
> >head off. Can anyone tell me what size tool I need to fit the head
> >bolts? I think they are maybe T-50 torx, but not sure. The tool has to
> >be long to fit down inside the bores. If anyone knows what tool to use,
> >and where I can get one, I would be most grateful.
>
> It appears similar to a torx head but it's actually a polydrive.
> http://buy1.snapon.com/catalog/item....re&dir=catalog
What's a polydrive? I clicked the link, but didn't have it. Where can
I get one?
>
email@invalid.address says...
> On Wed, 22 Aug 2007 22:18:30 GMT, <T_Diver@hotmail.com> wrote:
>
> >I have a 2001 Audi A4 1.8 turbo engine. I am trying to get the cylinder
> >head off. Can anyone tell me what size tool I need to fit the head
> >bolts? I think they are maybe T-50 torx, but not sure. The tool has to
> >be long to fit down inside the bores. If anyone knows what tool to use,
> >and where I can get one, I would be most grateful.
>
> It appears similar to a torx head but it's actually a polydrive.
> http://buy1.snapon.com/catalog/item....re&dir=catalog
What's a polydrive? I clicked the link, but didn't have it. Where can
I get one?
>
08-23-2007 | 06:21 AM
#9
Guest
Posts: n/a
Re: Audi 1.8 cylinder head bolt question
In article <k5lqc3tt9sheb2hh1jh2fc60elocdoqeij@4ax.com>,
email@invalid.address says...
> On Wed, 22 Aug 2007 22:18:30 GMT, <T_Diver@hotmail.com> wrote:
>
> >I have a 2001 Audi A4 1.8 turbo engine. I am trying to get the cylinder
> >head off. Can anyone tell me what size tool I need to fit the head
> >bolts? I think they are maybe T-50 torx, but not sure. The tool has to
> >be long to fit down inside the bores. If anyone knows what tool to use,
> >and where I can get one, I would be most grateful.
>
> It appears similar to a torx head but it's actually a polydrive.
> http://buy1.snapon.com/catalog/item....re&dir=catalog
What's a polydrive? I clicked the link, but didn't have it. Where can
I get one?
>
email@invalid.address says...
> On Wed, 22 Aug 2007 22:18:30 GMT, <T_Diver@hotmail.com> wrote:
>
> >I have a 2001 Audi A4 1.8 turbo engine. I am trying to get the cylinder
> >head off. Can anyone tell me what size tool I need to fit the head
> >bolts? I think they are maybe T-50 torx, but not sure. The tool has to
> >be long to fit down inside the bores. If anyone knows what tool to use,
> >and where I can get one, I would be most grateful.
>
> It appears similar to a torx head but it's actually a polydrive.
> http://buy1.snapon.com/catalog/item....re&dir=catalog
What's a polydrive? I clicked the link, but didn't have it. Where can
I get one?
>
08-23-2007 | 02:58 PM
#10
Guest
Posts: n/a
Re: Audi 1.8 cylinder head bolt question
T_Diver@hotmail.com wrote:
> In article <k5lqc3tt9sheb2hh1jh2fc60elocdoqeij@4ax.com>,
> email@invalid.address says...
>
>> On Wed, 22 Aug 2007 22:18:30 GMT, <T_Diver@hotmail.com> wrote:
>>
>>
>>> I have a 2001 Audi A4 1.8 turbo engine. I am trying to get the cylinder
>>> head off. Can anyone tell me what size tool I need to fit the head
>>> bolts? I think they are maybe T-50 torx, but not sure. The tool has to
>>> be long to fit down inside the bores. If anyone knows what tool to use,
>>> and where I can get one, I would be most grateful.
>>>
>> It appears similar to a torx head but it's actually a polydrive.
>> http://buy1.snapon.com/catalog/item....re&dir=catalog
>>
>
> What's a polydrive? I clicked the link, but didn't have it. Where can
> I get one?
>
Another site for the tool at a better price:
http://www.zdmak.com/wbstore/main.as...OLKSWAGEN&bl=9
