3M kit
02-09-2008 | 11:26 AM
#1
Thread Starter
Audi Forum - Posts like an A4
Joined: Dec 2007
Posts: 164
From: Ontario
3M kit
Guys is one of you have any instructions for installing the 3M stuff on the car ? any DIY for that? I would appreciate any help I bought them from eBay but I haven’t installed it yet.
02-09-2008 | 07:30 PM
#2
Audi Forum - Posts like an A6
Joined: Nov 2006
Posts: 947
Re: 3M kit
Use rubbing alcohol or high intensity cleaner to clear off the area you are about to apply it to, to clean off dirt etc etc...
try dry fitting into your car first without peeling back the sticky stuff...
Use a solution of a small amount of soap and water and put it in a spray can.
Spray the area well, where you are about to apply the stuff to.
Apply the clear bra and move it around into position... This step will not work if you do not have enough water on it... Spray lots of water and soap in the previous step...
Smooth out the wrinkles with a credit card or other object with an edge (i've used credit cards for applying same stuff onto my phone, for bigger projects I have a fairly soft plastic squeegee)
Push the water with the squeegee to the edge of the clear bra to get rid of the water bubbles.
Do this on a sunny day in + temperatures, so you do not have the water freeze on you as the paint is still moist.
Good Luck!
try dry fitting into your car first without peeling back the sticky stuff...
Use a solution of a small amount of soap and water and put it in a spray can.
Spray the area well, where you are about to apply the stuff to.
Apply the clear bra and move it around into position... This step will not work if you do not have enough water on it... Spray lots of water and soap in the previous step...
Smooth out the wrinkles with a credit card or other object with an edge (i've used credit cards for applying same stuff onto my phone, for bigger projects I have a fairly soft plastic squeegee)
Push the water with the squeegee to the edge of the clear bra to get rid of the water bubbles.
Do this on a sunny day in + temperatures, so you do not have the water freeze on you as the paint is still moist.
Good Luck!
02-09-2008 | 07:50 PM
#3
Thread Starter
Audi Forum - Posts like an A4
Joined: Dec 2007
Posts: 164
From: Ontario
Re: 3M kit
Use rubbing alcohol or high intensity cleaner to clear off the area you are about to apply it to, to clean off dirt etc etc...
try dry fitting into your car first without peeling back the sticky stuff...
Use a solution of a small amount of soap and water and put it in a spray can.
Spray the area well, where you are about to apply the stuff to.
Apply the clear bra and move it around into position... This step will not work if you do not have enough water on it... Spray lots of water and soap in the previous step...
Smooth out the wrinkles with a credit card or other object with an edge (i've used credit cards for applying same stuff onto my phone, for bigger projects I have a fairly soft plastic squeegee)
Push the water with the squeegee to the edge of the clear bra to get rid of the water bubbles.
Do this on a sunny day in + temperatures, so you do not have the water freeze on you as the paint is still moist.
Good Luck!
try dry fitting into your car first without peeling back the sticky stuff...
Use a solution of a small amount of soap and water and put it in a spray can.
Spray the area well, where you are about to apply the stuff to.
Apply the clear bra and move it around into position... This step will not work if you do not have enough water on it... Spray lots of water and soap in the previous step...
Smooth out the wrinkles with a credit card or other object with an edge (i've used credit cards for applying same stuff onto my phone, for bigger projects I have a fairly soft plastic squeegee)
Push the water with the squeegee to the edge of the clear bra to get rid of the water bubbles.
Do this on a sunny day in + temperatures, so you do not have the water freeze on you as the paint is still moist.
Good Luck!
thanks man for taking the time answer my question , great instructions , I guess I will wait to do that in the summer when it's wormer than now, thanks again
02-10-2008 | 10:49 AM
#4
Audi Forum - Posts like an S4
Joined: May 2007
Posts: 242
From: Ajax, Ontario
Re: 3M kit
Use rubbing alcohol or high intensity cleaner to clear off the area you are about to apply it to, to clean off dirt etc etc...
try dry fitting into your car first without peeling back the sticky stuff...
Use a solution of a small amount of soap and water and put it in a spray can.
Spray the area well, where you are about to apply the stuff to.
Apply the clear bra and move it around into position... This step will not work if you do not have enough water on it... Spray lots of water and soap in the previous step...
Smooth out the wrinkles with a credit card or other object with an edge (i've used credit cards for applying same stuff onto my phone, for bigger projects I have a fairly soft plastic squeegee)
Push the water with the squeegee to the edge of the clear bra to get rid of the water bubbles.
Do this on a sunny day in + temperatures, so you do not have the water freeze on you as the paint is still moist.
Good Luck!
try dry fitting into your car first without peeling back the sticky stuff...
Use a solution of a small amount of soap and water and put it in a spray can.
Spray the area well, where you are about to apply the stuff to.
Apply the clear bra and move it around into position... This step will not work if you do not have enough water on it... Spray lots of water and soap in the previous step...
Smooth out the wrinkles with a credit card or other object with an edge (i've used credit cards for applying same stuff onto my phone, for bigger projects I have a fairly soft plastic squeegee)
Push the water with the squeegee to the edge of the clear bra to get rid of the water bubbles.
Do this on a sunny day in + temperatures, so you do not have the water freeze on you as the paint is still moist.
Good Luck!
02-11-2008 | 12:18 AM
#5
Audi Forum - Posts like an A6
Joined: Nov 2006
Posts: 947
Re: 3M kit
you can grab it from ebay or you can buy it from specialty shops on a custom order basis...
When you shop on ebay, go with brand name stuff, like 3M and many others, rather then the ultra cheap junk. It makes sense to pay a bit more, as some of the brandless junk yellows over time and cracks...
When you shop on ebay, go with brand name stuff, like 3M and many others, rather then the ultra cheap junk. It makes sense to pay a bit more, as some of the brandless junk yellows over time and cracks...
02-11-2008 | 07:11 AM
#7
Audi Forum - Posts like an A3
Joined: Jul 2007
Posts: 82
From: Vaughan
Re: 3M kit
Here is a full step by step guide. Its not that hard just takes some time and two people is best.
How to install a clear bra to your vehicle
How to install a clear bra to your vehicle
02-11-2008 | 11:27 AM
#8
Thread Starter
Audi Forum - Posts like an A4
Joined: Dec 2007
Posts: 164
From: Ontario
Re: 3M kit
Here is a full step by step guide. Its not that hard just takes some time and two people is best.
How to install a clear bra to your vehicle
How to install a clear bra to your vehicle
Thread
Thread Starter
Forum
Replies
Last Post
Max_Boost
Performance Parts & Tuning
2
11-21-2007 07:54 PM
Richard Brown
Audi Mailing List
0
02-23-2004 06:41 AM
EdG
Audi Mailing List
0
06-27-2003 04:21 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
