Noise at 1000-1500 rpm
#1
Noise at 1000-1500 rpm
Hi,
Lately I noticed my A4 3.0 Quattro started to make a noise when engine starts in the morning. at first it starts at 1200rpm then after minute goes to 800rpm and then when I push the gas makes weird noise around 1000-1500rpm, when is higher then 1500rpm it's stop making a noise , when rpm drops noise comes back and stops below 1000rpm, It does on Neutral or Drive for around 5-10 minutes. Along with this noise I can also feel some vibrations when holding steering wheel. Any ideas before I will send it to a mechanic??? Thanks in advance!
VAG reported no faults in engine controller:
Address 01: Engine
Controller: 8E0 909 559 D
Component: 3.0L V6/5V G 0002
Coding: 0016751
Shop #: WSC 63351
No fault code found.
Readiness: 0000 0000
The only one fault i see is :
Address 08: Auto HVAC
Controller: 8E0 820 043 G
Component: A4 Klimaautomat 0712
Coding: 00000
Shop #: WSC 63351
1 Fault Found:
01274 - Air Flow Flap Positioning Motor (V71)
41-10 - Blocked or No Voltage - Intermittent
Anyone knows what wrong?
-----------------------------------------------------
I just figure it out myself , thanks anyway
Lately I noticed my A4 3.0 Quattro started to make a noise when engine starts in the morning. at first it starts at 1200rpm then after minute goes to 800rpm and then when I push the gas makes weird noise around 1000-1500rpm, when is higher then 1500rpm it's stop making a noise , when rpm drops noise comes back and stops below 1000rpm, It does on Neutral or Drive for around 5-10 minutes. Along with this noise I can also feel some vibrations when holding steering wheel. Any ideas before I will send it to a mechanic??? Thanks in advance!
VAG reported no faults in engine controller:
Address 01: Engine
Controller: 8E0 909 559 D
Component: 3.0L V6/5V G 0002
Coding: 0016751
Shop #: WSC 63351
No fault code found.
Readiness: 0000 0000
The only one fault i see is :
Address 08: Auto HVAC
Controller: 8E0 820 043 G
Component: A4 Klimaautomat 0712
Coding: 00000
Shop #: WSC 63351
1 Fault Found:
01274 - Air Flow Flap Positioning Motor (V71)
41-10 - Blocked or No Voltage - Intermittent
Anyone knows what wrong?
-----------------------------------------------------
I just figure it out myself , thanks anyway
Last edited by nemezis; 05-16-2009 at 11:39 AM.
Thread
Thread Starter
Forum
Replies
Last Post
voodooca
A4-B5 - (Typ 8D, 1994–2001)
2
03-03-2012 01:29 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)